Hi gents
Has anyone had their motors nearly run but just wont fire up ? When I cut the white wire (orps) it runs fine but as soon as I replace it she wont run just nearly gets there but wont go . I have replaces the orps , injector seals , tps . I tried to compression test it and broke 3 glow plugs so I took the head off removed the broken ones and fitted it back up . It has very small crack in the glow plug hole of 3 cylinders but i dont know if that would be causing my problem , as the compression is fine.
When It runs I get 2.7 volts at the white wire (orps) , It doesn't blow any smoke .
Any ideas would be great.