Spacer Diff Drop

When I fitted my Lokka, I decided to try a spacer diff drop(thanks to BennHW). I only ended up doing 14mm because I did not want to do any other mods to the brackets or lower crossmember. The Jackaroo has been lifted 40mm. I originally used M16 nuts as spacers but then got alloy spacers made. The whole process would have taken any hour, hardest part is getting the bolts undone. I needed 20mm longer high tensile bolts cost $40. Sorry I have not any before + after pics of CV angles but there is noticeable ease of angle at full flex. At this stage I will not be shaving bump stops.



Alloy spacers



Spacer fitted Passenger's side front mount



Clearance Passenger's side bracket, there is more on the driver's side.



There is also clearance on lower cross member not needing to modify.