OK, I'm trying to remove the intake manifold from the ol 4JX1. I'm following the manual but things are looking different. I've removed 5 long bolts from the underside of the manifold along with the throttle body, egr, map sensor etc. The pictures in the manual shows those bolts to be studs and nuts. I still can't get the manifold to budge at all. The only thing I haven't undone yet is the high pressure oil pipe but i thought i would have at least some movement at this stage.
1)How much oil should i expect to drip from the high pressure oil pipe when i undo that?
2)How many bolts should i remove before the manifold comes off?
I'm planning to clean it right up and fit an oil catch can after so hopefully it shouldn't get so blocked up again. Any other common probs under the manifold area as i may as well fix it while i have the room
Matt
1)How much oil should i expect to drip from the high pressure oil pipe when i undo that?
2)How many bolts should i remove before the manifold comes off?
I'm planning to clean it right up and fit an oil catch can after so hopefully it shouldn't get so blocked up again. Any other common probs under the manifold area as i may as well fix it while i have the room
Matt