How do I separate motor and gearbox
I've got hold of another engine and am ready to remove old one. All bell housing bolts and mounts removed but won't separate. Read in the manual on levering apart but not sure how. Anyone got tips on...
View Articlealternator wanted
Gday guys, I need an alternator ASAP. Who is wrecking in the Newcastle area? Happy to pickup local. Consider Sydney sellers if you can courier quickly. Mine is putting out 18v (from dash converte...
View ArticleOil Rail Pressure Sensor Valve Rebuilding for 4JX1 engine.
Hello, A common problem i have experienced over 3 models with this engine whilst in my ownership has been this part that caused erratic running after a while (hesitation in acceleration and lumpy...
View ArticleReplacing a 6ve1 3.5L in a 99 Jackaroo
My 99 jackaroo has started to play up, been told its a big end bearing and just too much hassle to work on and got told to scrap the jack. So as a result im considering replacing the current engine...
View ArticleClik here to view.
ATTROCIOUS FUEL CONSUMPTION ISSUES
OK Guys What is going on I am averaging 21.5 Litres / 100 K's My Worked LS1 Tonner only uses 11/100 I plugged in my OBD11 reader and found 3 codes. I was able to clear them however they came straight...
View ArticleClik here to view.
HSV JACKAROO
G'day all, just new here. did a quick search and found no mention of HSV Jackaroos. I got myself a 94 HSV Jackaroo which seems rather unusual. all the references i find on these says that HSV did...
View ArticleInjector Harness
I just had the latest recall done, and requested Holden inspect my ongoing cold start issue. They recommended a new injector harness be fitted, which I replaced in February. Price in February $288, and...
View ArticleCheap Tech 2 scanner
All, I have found a Tech 2 for under $200. I am thinking of getting one. Any comments or does any have any history on these Chinese types?...
View Article2003 RA Rodeo 3.0td 4x4 orange four wheel drive light always flashing ??
Hi I have the orange four wheel drive light always flashing does anyone have any ideas as to why Cheers James
View Article2003 RA Rodeo 3.0td 4x4 orange four wheel drive light always flashing ??
Hi I have the orange four wheel drive light always flashing does anyone have any ideas as to why Cheers James
View ArticleClik here to view.
LED light bar
Has anyone fitted a light bar or led lights like the D2 from rigid and if so are you happy with them and how much did they cost. Geoff
View ArticleMonteray ABS fix
I am very pleased with the ABS module repairs Automotive electronics in Sydney did. Bit exe but money well spent. $400 with guarantee and worked a treat. 4 days turn around in the post from Melbourne...
View ArticleAre flywheel and pressure plate bolts re-usable?
Just got an excedy HD clutch kit with solid flywheel, and PP or flywheel bolts were not included in the kit. Can you re-use these or is it best to replace?
View ArticleClik here to view.
ROOF RACKS FOR SALE heavy duty 6mnths old $200.00
HEAVY DUTY TRACK MOUNT...... for holden frontera $200 6mnths old ready to poprivet on come off 2001 frontera will fit from 1999-2002 lwb check website for more details click to enlarge Longitudinal,...
View ArticleClik here to view.
Spacer Diff Drop
When I fitted my Lokka, I decided to try a spacer diff drop(thanks to BennHW). I only ended up doing 14mm because I did not want to do any other mods to the brackets or lower crossmember. The Jackaroo...
View ArticleClik here to view.
Independent HD Tie Rods
Hey All, Has anyone fitted these to their Jackaroo? I installed a set last year however after a trip to the High country found that the outer grease boots both sides were gone. After some inspection I...
View ArticleOil Rail Pressure Sensor Valve Rebuilding for 4JX1 engine.
Hello, A common problem i have experienced over 3 models with this engine whilst in my ownership has been this part that caused erratic running after a while (hesitation in acceleration and lumpy...
View Article4JX1 Won't start after cylinder head replacement
My 1999 Jackaroo was recently diagnosed with a cracked cylinder head after running hot after a water pipe failure. Once I made the decision to replace the head (rather than scrap the vehicle, it has...
View Article