For once I'm not posting about a major problem :-). I thought you guys might be interested in an EGR blocking plate for the 4JX1. I'm not the seller but i did give him the measurements so i wouldnt have to get an expensive once off made. This plate goes on the exhaust manifold side but allows you to keep the EGR vacuum line connected so in theory less codes. The measurements are off a permaseal gasket. Because it is the same thickness as the other gaskets you will need to seal it with copper grease. I haven't tested one yet but I've got one on the way. http://pages.ebay.com/link/?nav=item.view&id=121544834546&alt=web
↧