Hi,
I have a problem matic 4jx1 98 jackaroo the problem I had was the car kept stalling as the car came to a stop, and a non responsive accelerator.
Somebody mentioned to clean out the RPCV so I removed it cleaned it out, I also removed the fuel line that was in the way which was un necessary in the end. This resulted in breaking the thread and replacing the fuel rod under the ECS ( coolant sensor) I also snapped the connector and replaced that.
Also unnecessary I removed the lines off the primer pump.
After I put the car back together and bled the primer the car would not start with out the help of aerostart can anyone help me to get the piece of ###### going again!
I have a problem matic 4jx1 98 jackaroo the problem I had was the car kept stalling as the car came to a stop, and a non responsive accelerator.
Somebody mentioned to clean out the RPCV so I removed it cleaned it out, I also removed the fuel line that was in the way which was un necessary in the end. This resulted in breaking the thread and replacing the fuel rod under the ECS ( coolant sensor) I also snapped the connector and replaced that.
Also unnecessary I removed the lines off the primer pump.
After I put the car back together and bled the primer the car would not start with out the help of aerostart can anyone help me to get the piece of ###### going again!