Transmission playing up
Help needed. My trans is playing up big time. The abs light came on and when shifting from 2nd to 3rd there is a big thump. Then I stopped the car and shut it down and when I restarted it all was good...
View ArticleWhere do the vacuum hoses go?
Hi all, would anyone happen to have a diagram or pic of where the vacuum hoses run. My engine lacks power since installed, I pretty much guessed the hose positions as the one i got were all...
View ArticleCheap EGR Fix
G'Day All, I've got a 98 3.5 V6 petrol thats had a check engine light on for about six months. There was no noticeable symptoms except excessive fuel consumption which I didn't put down to an EGR so I...
View Article2004 Rodeo Flared Arch Trim
Hi, Everyone. I am trying to locate some rubber trim, This is the fill in rubber strip between the flared arches and the body. Mine has started to fall apart, I have tried my local panel beater but he...
View Articlediagnosis port
G Day to all im new to jackarooes I have recently obtained a 1992 3.2lt auto vehicle 230ks and having a few little issues the only repair manual I have found is the Haynes repair manual which seems...
View ArticleOil Rail Pressure Sensor Valve Rebuilding for 4JX1 engine.
Hello, A common problem i have experienced over 3 models with this engine whilst in my ownership has been this part that caused erratic running after a while (hesitation in acceleration and lumpy...
View ArticlePhoto. Is this diesel or oil in the water
I noticed a small leak from the radiator top hose to the engine. Today I poured 3.5 litres of distilled water into the radiator and when it reached full I was greeted with this! Is this oil or diesel...
View ArticleFrontera 2001 New Shocks & Springs Recommendation
Hi all, could I please get some recommended advice on replacement shocks and springs for my Fronty 2001 for all corners. I like the idea of getting a 2" lift at the same time. I will be doing more Hwy...
View ArticleJackaroo fuel pump no power supply
Hi all Our 3.5 v6 Jackaroo stopped running . Scan tool indicated Throttle Position Sensor Trouble code so bought one and no luck, still wont run. After checking out a few more things it appears its...
View ArticleWheels for a frontera
Hi guys, I am interested in getting a second set of wheels and tyres for my 2002 Frontera. Could anyone tell me if wheels from vehicles like the Rodeo, Dmax or Colorado have the same offset and would...
View ArticleAtt: Non Calmini lifted Frontera owners
I have been wanting a Calmini kit for about 4 years now, but budget has always gone elsewhere (who'd be a home owner!). Anyway, plan B has been to try and source the bent rear upper control arms so...
View ArticleNo power after oil change
Grateful for any help! Jack was running normal before oil and filter change. Now won't go faster than 60 klms/hr or change gear properly. Only thing different is changed from Magnatec to Penrite HP5....
View ArticleInjector Sleeve Repair (Do It Yourself) Step by Step
Hello everyone !! I recently had to do the dreaded injector sleeve seals and it was hard to find all the information and piece it together so I took photos from start to finish listing everything the...
View ArticleOil pressure without motor on
Hi all I've just notice I have oil pressure showing when I turn the key on to start I also have volts reading of about 10 volts an the pressure gauge reads about 400kpa. When I start the truck the...
View ArticleSeat Belts
Ive had the new D Max for only 2 weeks and find it has a very annoying problem with the passenger side seat belt. Apparently all belts excluding the drivers side has a locking feature for use with...
View Article4jx1 injector sleeve tool needed in newcastle
Hi I am about to do the injector sleeve orings on our jacks and would like to know if I could borrow hire or dose any one know were I could buy 1 in newcastle area
View ArticleHow many kms on your 2.8?
G'day everyone, Just want to see how many Kms people have on their 2.8 rodeo or have seen on someone elses? Cheers, Chompo!
View Article4JX1 ORPS diagnosis and replacement
Recently had to do the old oil rail pressure sensor replacement job on my Jack. I was a bit apprehensive tackling it without instructions, so thought I'd throw together a little how-to for anyone in...
View Articlesoft clutch pedal
Jumped in the 2007 rodeo this morning and clutch wasn't engaging unless foot to floor. Previous night was OK. Can't see any fluid leak on driveway. Anyone got an idea what could be going on?
View Article