Clik here to view.
Sensor Loom Wiring Diagram and rubbing point infront of battery.
Hey Guys - everyone is so helpful here its about time I gave back a little bit. Long Story short: My Issue : DTC 31 and 37 EGR vsv and EGR EVRV - no vacuum to EGR. Consequence of this issue: Check...
View ArticleFraser Island
4 weeks till we leave for Fraser. Car is ready (fingers crossed) camper trailer is ready hope the old girl will handle the sand towing the trailer. Has anyone towed on the beach with there fronty and...
View ArticleReverse light issues
G'day guys, I've got an issue with the reverse lights on my RA7 rodeo. They come on in every gear and flick off in nuetral until eventually the fuse blows. I've checked the schematic and have found...
View ArticleClik here to view.
Injector Sleeve Repair (Do It Yourself) Step by Step
Hello everyone !! I recently had to do the dreaded injector sleeve seals and it was hard to find all the information and piece it together so I took photos from start to finish listing everything the...
View Article4jx1 4wd not engaging ??
hey guys i took the wizard off road today hit 4x4 button selected low climbed a hill got the front wheels over the top and back wheels spun , nothing from the front so had to back all the way down the...
View ArticleStrange buzzling noise from blue relay after Alternator replacement
Hi yesterday got a "battery" symbol and 11,8 volts onboard by the the time I came home. Today, after I replaced the alternator with a new one, Ive got a very strange buzzling noise from blue relay. Ok,...
View Articlejackaroo snorkel fitting
Hey guys can anyone give me some advice on fitting a Snorkel to my 98 3.1 jack? Ive got the template but its not making heaps of sense. Any help would be appreciated . Thanks!
View ArticleClik here to view.
Rail pressure control valve
Pressure control valve Recommend retail price $680. (Obviously dealer dependant) Part # G*8971748720 The rail pressure control valve is in the high pressure oil circuit. It is an important device which...
View ArticleCAT RPCV works in 4JX1
just read on Utube that the guy named "delawarecop" there on YouTube has used a "CAT" RPCV to replace the Isuzu part successfully on a 4JX1. He wrote "cost me $150 landed and I have another 10 units...
View ArticleClik here to view.
Tech2
hey guys i live in the central coast at killarney vale and was hoping someone would come around with a tech2 i don't have much but can give you what little i have or i have ALOT of spirits
View ArticleFraser Island
4 weeks till we leave for Fraser. Car is ready (fingers crossed) camper trailer is ready hope the old girl will handle the sand towing the trailer. Has anyone towed on the beach with there fronty and...
View ArticleHow much oil into Turbo after rebuild
I have fitted the turbo after the rebuild. Filling the turbo with oil is a Very slow process . Is 30 to 40 ml enough or should I continue to 100ml +?
View ArticleWinch bullbar wanted
As stated above, has anyone got a winch bulbar for sale reasonably cheap. I have an alloy bulbar fitted at the moment so am happy to do a trade of some kind if interested. Located Brisbane. I know I...
View ArticleInjector copper gaskets, won't budge!
Hi all Mid injector sleeve replacement, can't get the old copper washers off the injectors... Any hints or tips? ps, found an easy way to clean cylinders, I put half a cup of diesel in each and...
View ArticleWont start all of a sudden different problem?
Hey I've got a 2000 3.0l diesel 4xj1 with 235000KMs I've had the orps done 2yrs ago and the injectors, but can't seem to figure this new problem. I drove to work and the car ran fine then 9hrs later...
View ArticleWater Leak
Driving home Thursday night I noticed steam coming from under the bonnet (temperature gauge in the red). Once I stopped and lifted the bonnet there was a lot of hissing coming from under the throttle...
View ArticleClik here to view.
Injector Sleeve Repair (Do It Yourself) Step by Step
Hello everyone !! I recently had to do the dreaded injector sleeve seals and it was hard to find all the information and piece it together so I took photos from start to finish listing everything the...
View ArticleFrontera wheel and tyre sizes
Hey folks I know this has been hashed out before and for that I apologise in advance. However I have only recently gotten into 4wding and the whole scene. I have a 01 frontera s with factory 15 inch...
View ArticleSleeve time now... pulling tool?
Wow, what a ride... Ok, so i had the clutch replaced, nice new exedy solid flywheel and clutch and pressure plate. New brembo pads for front and rear, redid the front hubs as the PO had used so much...
View ArticleITS TIME TO NAME AND SHAME
Please take heed I used to own a sleeve puller, that's probably been around Australia more times than captain Cook, while on loan, Like a good carrier pigeon it always return home, until the last time...
View Article