Jackaroo parts
Can someone give me the address of the Dubai guy that sells Jackaroo parts? Adrian
View ArticleSub tank
I know people have used a jackarro fuel tank for a second fuel tank but I was wondering how you plumb up the tank and what was done with the filler neck on the second tank
View ArticleHelp with buying/hiring a 4jx1 injector sleeve removal tool
Hi, does anyone have information on where I could buy a 4jx1 injector sleeve removal tool for a reasonable price or could someone be so kind as to let me hire theirs? I am ordering all the applicable...
View ArticleHelp with Jackaroo
Been here before but new info My Jackaroo as been playing up for awhile now with hesitation on acceleration. I had to do an oil change a few days ago and Lo and behold the car was like new again no...
View ArticleWhere do I mount that UHF radio??
There are not a lot of places in cars these days suitable for the mounting of a UHF CB radio....if you have a LT model Rodeo you might like to consider this..the LT models have a roof mounted cluster...
View ArticleGrinding noise in left rear already replaced wheel bearing
Hi all I have a Grinding noise in the left rear so I replaced the wheel bearing. But it is still there, it happens when turning right only and on take off. I just noticed that when I spin the wheels...
View ArticleStart after seal replacement
Hi all I have just followed Jeff Halls post and replaced my injector sleeve seals. I drained all fuel replaced both oil filters aswell. It just doesn't want to fire. Q1.How tight should the plunger get...
View ArticleWinch bullbar wanted
As stated above, has anyone got a winch bulbar for sale reasonably cheap. I have an alloy bulbar fitted at the moment so am happy to do a trade of some kind if interested. Located Brisbane. I know I...
View ArticleWater Methanol Inj
I am thinking of fitting water meth inj on Jack 4jx1.Run 50/50 mix.Kit from US around $300.What do you think ? Cheers Dennis
View ArticleHUD - Heads Up Display
Hi everyone I currently have a HUD's in the hire car we are using and I love it. Looking to add one to my Colorado 7, maybe something like this...
View ArticleRough idle, loss of power
My Jack has a very rough idle and a lack of power, particularly under 2000rpm, so having read other posts I suspect I may have a faulty injector but it would be great if I could check the injectors...
View Articlemu gearbox
Will a rodeo gearbox fit an isuzu mu with a 4jg2 motor and where might I find parts for the mu in queensland
View Articlecold/hot dash oil pressure
Hey guys, What dash oil pressure does everyone get at cold idle, cold 2000 rpm, hot idle and hot 2000 rpm? Is there a specified value it should be anywhere? (can't see it in workshop manual). I...
View ArticleThermatic fan conversion
Hi all, After reading earlier posts about converting to to an electric thermatic fan, I thought I'd do the same. However, I decided I didn't like the idea of bolting an aftermarket unit straight to the...
View ArticleATTROCIOUS FUEL CONSUMPTION ISSUES
OK Guys What is going on I am averaging 21.5 Litres / 100 K's My Worked LS1 Tonner only uses 11/100 I plugged in my OBD11 reader and found 3 codes. I was able to clear them however they came straight...
View ArticleHelp with Jackaroo
Been here before but new info My Jackaroo as been playing up for awhile now with hesitation on acceleration. I had to do an oil change a few days ago and Lo and behold the car was like new again no...
View Articlequick and easy RPCV removal
I was dreading the idea or having to remove my RPCV for cleaning, having to remove the ECU, fuel filter, fuel pipes, egr, front wheel to get through the wheel arch to get at things, I wasn't keen on...
View ArticleWhere do I mount that UHF radio??
There are not a lot of places in cars these days suitable for the mounting of a UHF CB radio....if you have a LT model Rodeo you might like to consider this..the LT models have a roof mounted cluster...
View Article