tps got crazy
hi everyone since i bought the car, couple of years ago, i have repeating problem with the TPS of high voltage. in the first time i bought new sensor and i had quiet for few months. when to problem...
View ArticleClik here to view.
Bent rear upper arm
I have a rear upper bent control arm for sale if anyone is interested. Located Brisbane. Pm for details.
View ArticleO.R.P.S. TEST ???????????
Hi all is there a test that can be carried out on ORPS. I have read about the "cut white wire test" but forget what it was in relation to ??? I probably have lots of other things to check and...
View Articleinjectors grade programming
Hi there, After replacing all 4 injectors with brand new ones, i went to the dealer today to program the new grades. For some reason the mechaic did not want to see the injectors numbers and just...
View ArticleTech 2 info required
G'day all, I want to buy a Tech 2 and the associated leads, plugs etc but have found a lot of different items online for Tech 2. Which brand of Tech 2 are people happy to recomend to others and which...
View Articleare these heater hoses??
Hey guys I recently got my 94 jackaroo on the road and noticed The temp started to rise so pulled into servo for fuel poped the bonnet and everything seemed to be okay another 30mins later temp started...
View ArticleClik here to view.
Well this is interesting....... Help
I would just like to start by saying hi to everyone on here, you guys helped me decide on wanting a jack with the 3.0. we have 4 Jackaroos in the family 3 being petrol as we always believed the 4jx1...
View Articletps got crazy
hi everyone since i bought the car, couple of years ago, i have repeating problem with the TPS of high voltage. in the first time i bought new sensor and i had quiet for few months. when to problem...
View ArticleHELP --- E.C.M. J2 connector pin 7
Does anyone how to correctly identify ECM connector j2 pin 7. this is the so called white wire from the O.R.P.S. that can be cut to start the vehicle in limp mode and work if you have a faulty O.R.P.S....
View ArticleOld Faithful has dummy spit. Brain power needed for 4jx1
Last week the faithful old jack of 13 years 265 000 km had a dummy spit. At first it started being hard to start on cold mornings, but once running would be ok and run well. Starting was easy when warm...
View Article4JX1 Hard to start
Hi Everyone, I would like to start by saying thank you to all of you who have posted some very helpful and informative information in this forum. I have a 1998 Jackaroo which I bought a couple of...
View Article2004 RA RODEO only idles
Hi All, I have been given a RA Rodeo. It will only idle, doesnt appear to have any fault codes, But not sure my scan tool can read it. No Check Engine light on. It will start no problems, but will...
View ArticleNeed Help to identify fault codes RA rodeo diesel
Hi, I have broken down and need some help, all the workshops are shut. My car is a 2005 RA Rodeo ,it has the isuzu engine with the intercooler at the front. The engine just cut out while i was driving...
View ArticleClik here to view.
multiple fash codes and only idles
Hi peoples, A few weeks ago, started my ute up and stalled it in reverse (not enough revs, and cold - as my brain was). Had done exactlt the same on many mornings . his time though when I kicked it...
View Article4jx1 lots of work done hard to start
Hi All Hopeing there is some one out there in the frustrating world of 4JX1 motors that can help me with this. I own a 2000 3.0l jackaroo. i bought the car cheap as it had running issues but i took...
View Articlewhat's the best place to order wiring hairness connectors?
Hi was replacing the the OPRS the other day and broke the clip at oprs connector. Put a close look at it and realized that its contacts are not soldered, just clamped around the wire and than pushed...
View ArticleNo Fuel Returning
Hi everyone, just thought I would check here that there isn't a simply issue before I start unbolting. Problem is that I am getting no fuel returning at all, from what I understand I should have more...
View ArticleClik here to view.
Att: Non Calmini lifted Frontera owners
I have been wanting a Calmini kit for about 4 years now, but budget has always gone elsewhere (who'd be a home owner!). Anyway, plan B has been to try and source the bent rear upper control arms so...
View Articlecold/hot dash oil pressure
Hey guys, What dash oil pressure does everyone get at cold idle, cold 2000 rpm, hot idle and hot 2000 rpm? Is there a specified value it should be anywhere? (can't see it in workshop manual). I...
View Article