Folding mirror fault
Driver's side, (R/H) does'nt work. It does'nt fold when the button is pushed. mirror adjusts and heats as per normal. I am presuming the motor is broken etc. I can get a replacement locally but in...
View ArticleStrange happenings with my 03 rodeo
I have a 03 RA diesel rodeo with a 05 motor in it. It has been running perfect until the other night. I work night shift, and was driving home around 2am, sitting on around 105 kph and the engine light...
View ArticleUnusual loss of power then blue/white smoke - HELP!
Hi all, I have spent months now trying to fault find my problem by searching and reading forums, especially grateful to every one here and their posts. I am hoping for some new direction as i am now...
View ArticleRear Diff Lock
Ok gents I am in the process of fitting a rear diff lock to my 2002 jack diesel, Do I need to replace the LSD with a non LSD carrier? If so what year diff would I use. There seems to so many different...
View Article4JX1 Repair ?
Has anyone successfully repaired a 4JX1 motor that has had 'fuel in the sump - fuel in the cooling system and water in the fuel ' ? If so can they please explain how it was done ?
View ArticleJackaroo l8 6ve1 speedo corrector
Has anyone ever used one of these on their jack? I'm pretty sure I'm going to get one http://m.jaycar.com.au/m_productView.asp?ID=KC5435 Any feedback would be appreciated
View ArticleDiesel engine into rodeo
I can get hold of a complete diesel Colorado wrecked but running good. Would it be feasible to transplant the diesel engine into an 2004 rodeo ra petrol? I can't warrant the expense of selling the car...
View ArticleOil Rail Pressure Sensor Valve Rebuilding for 4JX1 engine.
Hello, A common problem i have experienced over 3 models with this engine whilst in my ownership has been this part that caused erratic running after a while (hesitation in acceleration and lumpy...
View ArticleMy DIY jackaroo roof racks
Hi Guys, Sorry i didnt take build photos but here is my roof racks half completed, next step is to make them ARB style with tube around the outside, tube side rails and a mesh floor. for this reason i...
View Article4JX1 Fuel Filter
Hey All Got the truck in for a service tomorrow and realised that Ive got the oil filters and air filter part numbers on the pinned topic here (which is awesome by the way) but there is no mention of...
View ArticleGlow plug
Hi guys, wondering if anyone has ever measured the size of the hole in the head that the end of the glow plug pokes through into the combustion chamber? Just thought someone might have one laying...
View ArticleJackeroo 3 Link Conversion
Hi, I am in the process of collecting parts and ideas for a new build and am considering a 3 link rear suspension (plus panhard) set up out of a Jack. I have been under a couple and the set up looks...
View Articleambient temperature guage
Hello, I have recently bought a 02 jack nullabor. Love the vehicle so far but the annoying thing is I have an ambient temperature gauge that is not working. The vehicle i have has the...
View Article2009 Colorado Chassis & 2004 Rodeo RA
Hey guys Does anyone know if I am able to fit a 2009 Holden Colorado 3L Diesel engine, gearbox, transfer, ECU and wiring loom etc from a donor car into a 2004 Holden Rodeo RA? Both vehicles are 4wd...
View Article? Fuel Primer Pump
Dear All, I am still struggling along without answers. The car is still missing and without power. Thanks again to my new friend Sergey who stopped off in Newcastle to have a look at the beast. I am...
View ArticleRear Bar..
HI All, JUst wondering if anyone has knocked up a steel rear bar for a 2000 JAck? I have been chasing one up but cant find any. I work in a steel fabrication workshop so access to welders, plasma...
View ArticleOil pressure sender thread size
Hi guys,Does anyone know what the thread size is for the Oil pressure sender that lies on the engine oil cooler? From what I understand it’s either 1/4 NPT (BSP) or M14 x 1.25.The reason for asking is...
View Article2004 V6 Isuzu uprades
Hi, new to forum, Just wondering and prob been asked before, I have a 2004 Rodeo, with a 3.5 V6 engine all standard. Its done about 212000 Kms and still runs really well, all be it bad on fuel. My...
View ArticleTail gate
My lower tail gate handle he's decided to not work so I can't open it how do I take the trim off to get to the mechanism
View Article