Clik here to view.
Replacement Head - new or used
Hi all, well the dramas continue. I've had a blown head gasket for awhile and have got it down at a local mechanic, only to be told my head is cracked and I have a scored bore. Fun days. The...
View Article4jx1 injector sleeve removal tool please help!!!
Anyone in brisbane that has a tool for 4jx1 injector sleeve that I can borrow asap I need to get our car back on the road as we just had a new born a couple of days ago I am willing to pay for it...
View ArticleHp oil pump seal
I replaced the three o ring seals on my hp oil pump on my 4jx1 now my jack won't start if someone could give me advice greatly apreciated
View ArticleClik here to view.
Replacing driveshafts CVs
My Jack has had torn CV boots go unnoticed too long and now I have clicking when I turn left or right in 4WD I have ordered some new driveshafts at $220 each and plan to fit myself. Having not done...
View Articleauto problem ???
I have a 2002 auto V6 and the auto sometimes on the up change doesn't change cleanly it starts to change then hangs on to it for about 3 or 4 seconds it doesn't matter weather it is hot or cold. I had...
View ArticleChanging The Fuel Filter 2010 D-Max
Howdy guys First post here so sorry it's asking for advice, I have done a search but can't find the answer anywhere so here goes With the instructions for changing the fuel filter it states to loosen...
View Articlefrontera exractors
tried looking for extractors for the 2000 frontera, I can't find any, the closest I can think of is a rodeo with the 3.2l V6. same engine, just don't know if it would have the fitting for the EGR. or...
View Articlebubbling coolant and hard to start
Observations for my recent problem Recently overheated Gauge showed just below top of redline Replaced waterpump. now hard to start. Had to pump fuel primer to start. T Bubbles in coolant on idle...
View ArticleScangaugeE,
Hi guys, Is anyone using one of these on a 3.5L jack an if so where do you plug it in an is it useful. Thanks Geoff
View ArticleTiming belt change out
Hi all, I'm looking at changing my belt and water pump an all the other gear that should be done while I'm at it but after looking at the sites eBay motors and rockauto I'm not sure which brand I...
View ArticleWhistling noise
Hi all my fronty v6 sounds like I have fitted a turbo under acceleration think it could be the belt or clutch fan ...any suggestions? Thanks woodsey
View ArticleHard Ute Lid Colorado 2011 RC
Does anyone have an EGR (same as Holden assessory) hard ute lid fitted to 2011 Colorado? Wondering what the available height is to determine whether my fridge will still fit. It currently fits under...
View ArticleRodeo Automatic problem
I have recently purchased a 2005 3 litre turbo dual cab rodeo.I am happy with its performance and fuel economy,but it has an intermittant fault that someone may be able to help with.Occaisionally when...
View Articleegr valve block it off or not
Need some info on what ppl think about blocking off the egr valve? Thanks
View ArticleFree wheeling hubs
Hi does anyone know where to get them for a frontera 2001 v6 se ..? I have seen then on eBay some are $360 some are $230 ...will this improve my fuel economy greatly? Any brands better than others?...
View ArticleTransmission Removal, 4JX!, Manual
Hello all, (Sorry to start a new thread, but I can't find this topic anywhere. The clutch has failed - clutch won't open - seems fork has come out of release bearing or release bearing has pulled out...
View ArticleClik here to view.
Ignition Coil 1999 3.5 V6 Jackaroo
My daughters Jack is blowing smoke and missing badly. She recently ran out of fuel and I suspected the need for a new fuel filter however the first thing I checked were the spark plugs and I found to...
View ArticleFRONETRA MX 2001 AUTO V6 3.2LT
just want to find out what everyone else gets on petrol for a tank? 1/2 a tank iam getting 160kmh so i think i would be lucky to get 300km around town
View Article